S-D4007 RELIANCE ELECTRIC
It is precisely PLC that really has the ability to control these controls. PLC is controlled by processing, and PLC has many self-diagnostic functions. Make full use of these two advantages of PLC, so that PLC in the implementation of the above control, with a certain degree of self-adaptation, self-diagnosis ability, after the realization of automation, and remote, and then to achieve intelligence, is possible. This is also the inevitable trend of the development of these controls.
It is not only PLC that can accomplish such a system, but it is a recognized trend that PLC has become the main one.
2. According to the control scale:
It can be roughly divided into microcomputers, minicomputers, medium and large machines, and super large machines.
Microcomputer control of only a few points, more than a dozen points, dozens of points, such as OMRON company’s new ZEN machine, the host has 8 points, 10 points two, and expansion, more can be expanded to 34 points. Another example is the logo machine, the small one can only control 10 points. Also such as Mitsubishi’s alpha machine, I/O points have 6, 10 and 20 specifications, and alphaXL I/O points have 14 and 24 specifications. Some of these models also have simple programming tools embedded in them, making them easy to program. Because of its low price, easy to use, reliable work, small size… Moreover, its output current is larger than other PLCS, and some can reach 8 amps. It can completely become a replacement for the corresponding relay control of the new generation, and therefore, some call it programmable relay (PLR).
Minicomputer control points can reach more than 100 points, so much. For example, OMRON’s CPM2A, CP1H and CQM1H can reach 120, 320 and 512 points respectively. The company’s S7200 machine can also reach more than 100 points. The new S7-200 CN is the Chinese version. When large configuration, the number of control points can reach 248 (called I/O points for roads). Mitsubishi’s FX2N multi-point can also reach 256 points, while the FX3UC machine can reach more than 300 points.
Medium-sized machine control points can reach nearly 500 points, so that thousands of points. Such as OMRON CJ1H machine can be more than 2000 points. The German company’s S7300 machine can reach 512 points (switching quantity), and the newly launched 318-2 can also exceed 1000 points (switching quantity). In addition, an additional 128 analog inputs or outputs can be added. The basic model of Mitsubishi’s Q series can also control points up to 2048 points.
Indramat Rexroth Controller TDM 1.3-050-300-W1-000
INDRAMAT AC-Servo Controller TDM-3.3-030-300-W1
Indramat Umrichter RAC. Board 233303-05614-A05
INDRAMAT TBM 1.2-40-W1-220 BLEEDER TBM1.2-40-W1-220
INDRAMAT AC-Servo Controller TDM-1.2-050-300?-W1-220
Indramat Umrichter RAC. Board SN 234271-10388 A06
INDRAMAT Servo Controller TDM1.2-050-300-?W1-220 NEU
INDRAMAT AC-Servo Controller TDM-3.3-030-300?-W1
Indramat 232708-08068 A11 RAC Spindelantrieb
INDRAMAT AC- Servo Power Supply TVM-1.2-50-W0-2?20V
Indramat KDS 1.1-100-300 W1-2 Spindelregler
Indramat Umrichter RAC. Board 256047-02820 – A04
Indramat RAC 2.1-200-300 or RAC2.1-200-300 Reparatur
INDRAMAT KDA 3.3-050-3-A00-W1
INDRAMAT Permanent Magnet Motor MDD 093C-N-030-N2L-110G
Indramat A.C Servo Bleeder-TBM TBM 1.2-40-W1/220V
INDRAMAT AC- Servo Power Supply TVM-1.2-50-W0-2?20V
indramat Modul DLF 01
INDRAMAT AC-Servo Controller TDM-1.2-030-W1
INDRAMAT AC-Servo Controller TDM-2.1-30-300-W0 + MOD
INDRAMAT AC-Servo Controller TDM-1.2-050-300-W1-000
Indramat TDM 1.2-50-300-W1-220 TDM Bosch
INDRAMAT AC- Servo Power Supply TVM-2.1-050-W1-220V
INDRAMAT AC-Servo Controller TDM-1.3-050-300-W1-0
